Intellitect Water

Products & Applications

Intellisonde RM (River Monitor)

Cost effective and accurate environmental monitoring. No chemicals or membranes.

RM and FE Image

The technology is based upon our patented sensor platform and sensors, the sensors are more robust than traditional technologies and require no reagents or membranes. The units require less cleaning and intervention than other instruments with intervention periods up to 8 weeks.

Operational costs are less than chemical alternatives.

The RM has a built in data logger with easy access to the data by GPRS or other industry standard protocols, such as Modbus/SCADA.

Unique Sensor Platform

•  Robust, long life, long term deployment. Long term sensor use, up to 12 months between sensor changes.

•  Multi parameter at lower capital and operational cost.

•  No recalibration between sensor changes.

•  Longer intervals between cleaning.

Intellisonde RM

ParameterPerformance
Dissolved Oxygen0 to 100% saturation ± 20%
Conductivity0 to 100 mS/cm ± 5%
pH2 to 12 PH
Temperature- 5 to + 50°C ± 0.2°C
Turbidity0 to 350 NTU ± 0.5 NTU
ORP+ 1.0 volt to - 1.0 volt ± 1 mV
Ammonium ISEConcentration range 10 to 10 m (lower limits 0.02ppm)
(Temp 0 to +50°C)
(pH range 5 - 8)

Product Information…

Power Requirements

•  RM requires mains electricity 24VDC, rated for continuous use.

•  Submersible Pump requires 240V, will handle solids up to 3mm diameter, 3metres immersion depth, and has an integral strainer, IP68 Rated Enclosure.

Communications

•  GPRS

•  RS232/485

•  Ethernet TCP/IP

•  Modbus/SCADA

•  Voltage Outputs

Data Logging

•  Up to 7 parameters measured and logged at intervals from 1/minute to 1/hour

Sonde Head Materials

•  Peek, Stainless Steel

Operating Temperature

•  -5 to +50C

Get Adobe Acrobat